分页: 1 / 1

Fedora 36 KVM安装和设置

发表于 : 周日 6月 19, 2022 11:35 am
admin
安装KVM
# dnf -y install qemu-kvm libvirt virt-install
# systemctl enable --now libvirtd
# systemctl start libvirtd

设置桥接网卡br0

# add bridge [br0]
# nmcli connection add type bridge autoconnect yes con-name br0 ifname br0

# set IP address for [br0]
# nmcli connection modify br0 ipv4.addresses 10.0.0.30/24 ipv4.method manual

# set Gateway for [br0]
# nmcli connection modify br0 ipv4.gateway 10.0.0.1

# set DNS for [br0]
# nmcli connection modify br0 ipv4.dns 10.0.0.10

# set DNS search base for [br0]
# nmcli connection modify br0 ipv4.dns-search srv.world

# remove the current interface
# nmcli connection del enp1s0

# add the removed interface again as a member of [br0]
# nmcli connection add type bridge-slave autoconnect yes con-name enp1s0 ifname enp1s0 master br0

# restart
# reboot